Core Boards / Dev. Modules
Home> Products > Core Boards / Dev. Modules

ESP32-P4 Carrier Board

INQUIRY
Description

YeaCreate-ESP32-P4 Carrier Board Front View

YeaCreate-ESP32-P4 Carrier Board Front View

YeaCreate-ESP32-P4 Carrier Board Back side

YeaCreate-ESP32-P4 Carrier Board Back side


Introduction

The YeaCreate-ESP32-P4 Carrier Board is a development platform featuring high‑definition multimedia, high‑speed networking, versatile storage, and industrial‑grade power management. It connects seamlessly to the core board via high-density board‑to‑board (BTB) connectors, enabling developers to rapidly validate the functions of the YeaCreate‑ESP32‑P4‑CORE core board, streamline secondary development and debugging, and significantly shorten the path from prototype to mass production.


Dimensions

YeaCreate-ESP32-P4 Carrier Board Size


YeaCreate-ESP32-P4 Carrier Board Function List

YeaCreate-ESP32-P4 Carrier Board Function List

No.Description
112V Power Input (5.5 × 2.1 mm)
2RJ45 Ethernet Port, supports 10/100 Mbps auto-negotiation
3USB Type-A 2.0 Ports × 2;
UP: Connected to ESP32-P4 chip;
DOWN: Connected to ESP32-C6 chip;
4ESP32‑C6 EN Button
5ESP32‑C6 BOOT Button
6ESP32‑P4 40‑Pin GPIO Header​ (Pitch: 2.54 mm)
760‑Pin BTB Connector for ESP32‑P4 Core Board
840‑Pin BTB Connector for ESP32‑P4 Core Board
9ESP32‑P4 BOOT Button
10ESP32‑P4 EN Button
11Type‑C Interface
12DSI MIPI Interface​ (15‑Pin FPC, Pitch: 1.0 mm)
13ESP32‑C6 20‑Pin GPIO Header​ (Pitch: 2.54 mm)
14VBAT Power Supply​ (ESP32‑P4 built‑in RTC backup battery, Pitch: 1.0 mm)
15CSI MIPI Interface​ (15‑Pin FPC, Pitch: 1.0 mm)
16MicroSD / TF Card Slot

Pin Definitions

60-PIN BTB (S1)

No.DescriptionNo.Description
13.3V60C6_EN
23.3V593.3V
33.3V583.3V
43.3V57C6_TX
5-56C6_RX
6P4_GPIO055C6_GPIO9
7P4_GPIO154DSI_DON
8GND53DSI_DOP
9P4_GPIO5452DSI_CLKP
10P4_GPIO5351DSI_CLKN
11P4_GPIO5250DSI_D1N
12P4_SD1_PWR_CTL49DSI_D1P
13P4_SD1_CMD48P4_GPIO13
14P4_SD1_CLK47P4_GPIO15
15P4_SD1_D346P4_GPIO17
16P4_SD1_D245P4_GPIO14
17P4_SD1_D144P4_GPIO16
18P4_SD1_D043P4_GPIO11
19P4_RX42P4_GPIO9
20P4_GPIO3541P4_GPIO10
21P4_TX40P4_GPIO12
22P4_GPIO5139P4_GPIO8
23P4_GPIO5038P4_GPIO7
24P4_GPIO4937P4_GPIO6
25P4_GPIO4836P4_GPIO5
26P4_GPIO4735P4_GPIO4
27P4_GPIO4634P4_SDA
28GND33P4_SCL
29GND32ESP_VBAT
30GND31P4_EN

40-PIN BTB (S2)

No.DescriptionNo.Description
61C6_USB_DN100C6_GPIO5
62C6_USB_DP99C6_GPIO6
63CSI_DON98C6_GPIO7
64CSI_DOP97C6_GPIO8
65CSI_CLKP96C6_GPIO14
66CSI_CLKN95C6_GPIO15
67CSI_D1N94C6_GPIO4
68CSI_D1P93C6_GPIO3
69GND92C6_GPIO2
70P4_USB_DN91C6_GPIO1
71P4_USB_DP90C6_GPIO0
72GND89P4_GPIO24
73P4_GPIO2888P4_GPIO25
74P4_GPIO2987P4_GPIO26
75P4_GPIO3186P4_GPIO27
76P4_GPIO3285P4_GPIO30
77P4_GPIO3484P4_GPIO33
78P4_GPIO36833V3
79GND823V3
80GND813V3

40-PIN GPIO (J7) Connected to the ESP32-P4 chip

No.DescriptionNo.Description
15V25V
33.3V43.3V
5GND6GND
7GND8GND
9P4_EN10P4_GPIO0
11P4_GPIO3512P4_GPIO1
13P4_RX14P4_TX
15P4_SCL16P4_SDA
17P4_GPIO418P4_GPIO5
19P4_GPIO620P4_GPIO7
21P4_GPIO822P4_GPIO9
23P4_GPIO1024P4_GPIO11
25P4_GPIO1226P4_GPIO13
27P4_GPIO1428P4_GPIO15
28P4_GPIO1630P4_GPIO17
31P4_GPIO2532P4_GPIO24
33P4_GPIO2734P4_GPIO26
35P4_GPIO4636P4_GPIO47
37P4_GPIO4838P4_GPIO49
39P4_GPIO5340P4_GPIO54

20-PIN GPIO (J8) Connected to the ESP32-P4 chip

No.DescriptionNo.Description
15V23.3V
35V43.3V
5GND6C6_TX
7C6_EN8C6_RX
9C6_GPIO910C6_GPIO0
11C6_GPIO112C6_GPIO2
13C6_GPIO314C6_GPIO4
15C6_GPIO516C6_GPIO6
17C6_GPIO718C6_GPIO8
19C6_GPIO1420C6_GPIO15

15-PIN DSI(J1) Driven by the ESP32-P4

No.Description
1GND
2DSI_D1N
3DSI_D1P
4GND
5DSI_CLKN
6DSI_CLKP
7GND
8DSI_DON
9DSI_DOP
10GND
11P4_SCL
12P4_SDA
13GND
143.3V
153.3V

15-PIN CSI(J2) Driven by the ESP32-P4

No.Description
1GND
2CSI_DON
3CSI_DOP
4GND
5CSI_D1N
6CSI_D1P
7GND
8CSI_CLKN
9CSI_CLKP
10GND
11P4_GPIO31
12P4_GPIO36
13P4_SCL
14P4_SDA
153.3V

The YeaCreate-ESP32-P4 Carrier Board interfaces with the YeaCreate-ESP32-P4-CORE via two high-density board-to-board (BTB) connectors. J7​ is a 40-pin connector corresponding to the ESP32-P4 GPIO. It provides access to peripherals including the display interface, camera interface, USB-A (UP) port, TF card slot, ESP32-P4 UART interface, and RJ45 Ethernet port. This connector also facilitates control via the P4-BOOT and P4-EN buttons, and supports flash through the Type-C interface. J8 is a 20-pin connector corresponding to the ESP32-C6 GPIO. it has been configured for USB-A (DOWN) communication and flash, along with control via the C6-BOOT and C6-EN buttons.

Home Product Inquiry Share